Application guide

Watch it all the way through before you open the bottle.

• ☐Car washed thoroughly and decontaminated (clay bar recommended).
• ☐Paint dried completely — no water left in gaps, edges or mirrors.
• ☐Every panel degreased to remove oils, waxes and residue.
• ☐Weather checked: no rain expected — any raindrops on fresh coating leave white spots.
• ☐Not in very hot weather or strong direct sun — work in shade or on a cooler, overcast day.
• ☐Sponge ready and the VantreX bottle to hand.

1. 01Clean the paintWash, decontaminate (clay bar recommended), dry completely, then degrease each panel.
2. 02Pour 20–30 mlPour onto the sponge. On the first application, fully moisten the sponge.
3. 03Gently applySmooth, overlapping motions, one panel at a time.
4. 04Overlap each strokeOverlap the previous stroke to even out the coat.

• Doors & boot: Horizontal motion — left to right, top to bottom.
• Bonnet: Start near the windscreen and move toward the car logo.

• !Never apply to wet, dirty or un-degreased paint — the coating won't bond correctly.
• !Check the forecast: raindrops on fresh coating cause white spots.
• !Never apply in very hot weather or strong direct sunlight.
• !Work one panel at a time and finish it before moving on.
• !Within 1 hour: a mistake can be wiped off with industrial alcohol, IPA or degreaser, then reapplied.
• !After 3 hours: removal needs machine polishing.
• !If severe marks or streaks appear, wipe the whole panel and reapply from scratch — do not spot-fix partly cured areas.